Rippling facings
intermediateStub
A facing that buckles or shows on the outside instead of lying flat inside usually means it lacks understitching or the interfacing is too heavy. Understitch close to the seam and grade the allowances.
This article is a stub.
Know this technique? Help write it.
See also
Buttonhole fraying
Threads pulling loose around a cut buttonhole usually means the stitching was too loose, the fabric wasn't stabilized, or it was cut open before sewing finished. Interface the area and cut open last with sharp scissors.
Buttonhole too tight
A buttonhole that won't let the button through without straining the fabric usually means it was sized to the button's diameter instead of its circumference. Measure the button's girth and test on scrap before cutting.
Crotch pulling
Fabric pulling tight and creasing across the crotch of trousers usually comes from a crotch curve too shallow or a rise too short for the wearer. Lower the curve or lengthen the rise in a future muslin.
Stretched necklines
A neckline that gapes and has lost its shape usually comes from cutting on the bias without stabilizing, or handling the edge too much before finishing. Stay-stitch the neckline immediately after cutting.
Twisted seams
A side seam or inseam that spirals around the leg or body instead of running straight comes from pieces cut off-grain or one layer eased more than the other while sewing. Recut on true grain where possible.
Edited 8 h · 1 views
Threads about Rippling facings