Uneven hem
beginnerStub
A hemline that dips or rises around the garment instead of sitting level usually comes from not letting the garment hang before marking, so bias areas drop further. Let it hang, then mark and true the hem.
This article is a stub.
Know this technique? Help write it.
See also
Crotch pulling
Fabric pulling tight and creasing across the crotch of trousers usually comes from a crotch curve too shallow or a rise too short for the wearer. Lower the curve or lengthen the rise in a future muslin.
Stretched necklines
A neckline that gapes and has lost its shape usually comes from cutting on the bias without stabilizing, or handling the edge too much before finishing. Stay-stitch the neckline immediately after cutting.
Zip waves
Rippling fabric along a zipper opening comes from stretching the fabric while sewing or using a zipper the wrong length for the opening. Stabilize the seam with interfacing tape and match zip length to the opening.
Buttonhole fraying
Threads pulling loose around a cut buttonhole usually means the stitching was too loose, the fabric wasn't stabilized, or it was cut open before sewing finished. Interface the area and cut open last with sharp scissors.
Buttonhole too tight
A buttonhole that won't let the button through without straining the fabric usually means it was sized to the button's diameter instead of its circumference. Measure the button's girth and test on scrap before cutting.
Edited 8 h · 1 views
Threads about Uneven hem