One-way print sewn upside down
beginnerStub
A directional print ending up sideways or inverted on part of a garment happens when pieces are cut without checking the print's orientation. Lay out all pieces facing the same way before cutting.
This article is a stub.
Know this technique? Help write it.
See also
Bias distortion
Edges or seams that stretch and lose their shape happen when fabric cut near the bias grain is handled without support. Stay-stitch bias edges promptly after cutting and avoid pulling the fabric while sewing.
Fabric stretching while sewing
A seam that ends up longer than the fabric it was cut from, common on knits and bias cuts, comes from the foot or hands pulling fabric taut while sewing. Support the fabric's weight instead of pulling it.
Nap direction mismatch
Pattern pieces cut with pile running in different directions on fabrics like velvet or corduroy look a different shade once assembled. Always cut all pieces with a with-nap layout, following the pattern's nap arrow.
Napped fabric shading
Panels of the same fabric appearing to be different colors under light is an optical effect from pile fibers lying in opposing directions, not a dye issue. Cut every piece in the same nap direction.
Slippery fabric creep
Satin or silk sliding apart mid-seam despite pinning is caused by low surface friction between layers. Use fine silk pins or clips, hand-baste critical seams, and sew slowly with a walking foot.
Edited 8 h · 1 views
Threads about One-way print sewn upside down